Stock
items
ship in 3-7 busines days.
Non-stock items ship in 7-10
business days, non-refundable
after order is placed.
Fabricated-to-order
and special order items ship in 2-4 weeks, non-refundable
after order is placed.
Please
review our Warranty
And Return Policy before
completing your order.
CMI
Mini
Brake Racks
manufactured
in
the usa
designed
as
personal rappel device for 5/16" (8 mm) to 7/16" (10mm) static or
dynamic rope
MRACKB
$61.10 Stock item
4
solid aluminum bars
5/16"
stainless steel wire form
.75
lbs (340g)
8.3in
(21.08cm)
MBS
14,000 lbs (62.3kN)
HYRACK
$73.00 Non-stock
3
solid aluminum bars and 1 aluminum hyperbar
5/16"
stainless steel wire form
.90lbs
(408g)
8.3in
(21.08cm)
MBS
14,000 (62.2kN)
HYRACKNFPA
$93.20 Non-stock
3
solid anodized aluminum bars and 1 anodized aluminum hyperbar
5/16"
stainless steel wire form
.90lbs
(408g)
8.3in
(21.08cm)
MBS
14,000 (62.2kN)
HYRACKEXNFPA
$110.10 Non-stock
2
solid anodized aluminum bars and 2 anodized aluminum hyperbars
5/16"
stainless steel wire form
1.0lbs
(453g)
8.3in
(21.08cm)
MBS
14,000 (62.2kN)
SMC
NFPA14001 Brake Rack
manufactured
in the usa
6
bar
straight frame
aluminum
bars
stainless
top bar
1-stainless
steel top bar with tie
off
1-anodized
aluminum grooved
straight slot bar (use as #2 in rack)
4-anodized
aluminum angled brake
bars (use as #3, 4, 5 and 6 in rack)
length
14" (35.5 cm)
1.8
lbs. (857 g)
certified
to NFPA 1983-06 edition
and carries a "G" general use rating
$129.00
Stock item
SMC
NFPA14003 Brake Rack
manufactured
in the usa
6
bar straight long frame
aluminum
bars
stainless
top bar
1-stainless
steel top bar with tie
off
1-
anodized aluminum grooved
straight slot bar (use as #2 in rack)
4-anodized
aluminum angled brake
barsuse as #3, #4, #5 and #6 in rack)
length
17.9" (45.4 cm)
1.8
lbs (857 g)
certified
to NFPA 1983-06 edition
and carries a "G" general use rating
$132.00
Stock item
SMC
Brake
Rack Frames
manufactured
in the usa
J
Rack rappel rack frame is available in two eye configurations:
conventional or with the eye twisted 90 degrees for correct rack
orientation on a horizontal harness clip-in point as is typical with
most rescue harnesses
U-Rack
frame is available in two sizes allowing for 4 bar or 6 bar
configurations
stainless
steel provides optimal strength for building your own
customized rack
14.4"
x 2" 0.38"
14.5
oz (397 g)
13002
J Rack
13002
J Rack
Straght Frame
$51.00
13502
J Rack
Twisted Frame
$51.00
13106 U Rack 6 bar
$43.00
13105 U Rack 4 Bar
$34.00
Non-stock
SMC
Brake Bars
manufactured
in the usa
7/8"
Stainless Steel Brake Bars are machined from solid stainless steel
stock, these bars give you maximum strength and great wear
characteristics making this virtually the longest lasting bar on your
rack
1"
bars make locking off easier as well as providing additional friction
when needed
''training''
groove helps to keep the rope centered on the bar while descending and
the straight slot means the bar is held in place by the rope to help
prevent rigging the rope in backwards
aluminum
provides greater levels of friction
stainless
steel is more durable, handles additional heat developed under heavy
loads and on longer rappels, smoother, faster rappels, keeps rope
"cleaner"
tie-off
Bars provide added friction/control and facilitate lock-off of rope to
maintain position and/or hold a load
bars
with the “training” groove used as 1st or
2nd bar to help keep ropes aligned properly
bars
with angled slot are designed to “snap” onto rack
frame for more secure placement
bars
with straight slot are designed for added safety so that the rack may
not be loaded backwards
U
shaped stainless steel bars are designed to help dissipate heat and
reduce weight
11000
$56.75
Stainless
Steel
7/8"
diameter
tubular
angled
slot
grooved
2.47"
x .87"
4.1
oz (116g)
12020 $18.00
Stainless
Steel
1"
diameter
tubular
straight
slot
non-grooved
2.45"
x 1"
2.9
oz (82g)
12201
$9.45
Aluminum
7/8"
diameter
solid
angled
slot
non
grooved
2.5"
x .87"
1.9
oz (54g)
12401
$10.80
Aluminum
7/8"
diameter
solid
straight
slot
grooved
2.5"
x .87"
1.9
oz (54g)
12605
$11.00
Aluminum
7/8"
diameter
solid
red
straigfht
slot
grooved
2.5"
x .87"
1.9
oz (54g)
12500
$12.00
Stainless
Steel
7/8"
diameter
U
shaped
angled
slot
non
grooved
2.7"
x .86" x .82"
1.7
oz (48g)
12110
$33.00
Stainless
Steel
1"
diameter
tubular
two
hole
tie
off bar
non
grooved
3.65"
x 1"
5.3
oz (150g)
12301
$35.00
Stainless
Steel
1"
diameter
tubular
tie
off bar
grooved
3.65"
x 1"
5.1
oz (145g)
Stock item
Rock-N-Rescue Gold
Standard Brake Racks
manufactured
in
the usa
unique
design in rappel racks
CNC
machined, flat sided aluminum bars give an increased rope offest
between bars, resulting in an 18% increase in friction over standard
round bars
a generous
sized hyperbar with a stainless steel lockoff pin provides additional
friction in trying situations and provides an easier method of tying
off the rack
manufactured
in franceself-braking descender with anti-panic function for rescue
designed
for rescue-lacks a gate
multi-functional
handle allows the user
to unblock rope and control descent with the hand on the
braking
side of the rope
move
more easily on horizontal or
low-angle terrain thanks to the button on the handle
facilitate
positioning while on the
rope
anti-panic
function is engaged if the
user pulls too hard on the handle
pivoting
cam is released and
automatically brakes to stop the descent
anti-error
safety cam to reduce the risk
of an accident due to incorrect installation of the device on the rope
shape
of the cam is designed to improve
rope glide during an ascent
pivoting
cam makes it easier to take up
the slack in the rope
can
also be used to make a reversible
haul system
CERTIFICATION:
CE EN 341 Class A, NFPA
1983 G
18.6
oz (530 g)
D200SO
small
for
10-11.5mm
rope
gold
$269.95 Stock item
black
$279.95 Non-stock
D200LO
large
for 11.5-13mm rope
red
$269.95 Stock item
black $279.95 Non-stock
Petzl
Rig Self Braking Compact Descender
manufactured
in france
designed
for experts in rope access work
multi-functional
handle allows the user to unblock the rope and control descent
with hand on free end of rope
facilitate
position on rope without tying off the device
automatic
return system on the handle limits risks in case of an involuntary
action by the user
handle
storage position reduces the risk of snagging when the descender is
being carried on the harness
safety
gate on the moving side plate helps prevent dropping the device and
facilitates installation of the rope and passing intermediate anchors
pivoting
cam facilitates taking up the slack in the rope
can
also be used to make a reversible haul system
for
single ropes between 10.5 and 11.5 mm
NFPA1983-06
Light Use Certified
13.4
oz (380 g)
D21A
gold $188.95 Stock item
D21AN
black $199.95 Non-stock
Petzl
GriGri Belay With Assisted Braking
belay
device with assisted braking, compatible with a broad range of
single rope diameters for both gym and crag
feeding
slack and catching falls are done using standard belay
techniques - always keep a hand on the brake side of the rope
when
a climber falls, the device pivots on the carabiner, the rope
tightens and the cam pinches and brakes the rope
holding
the brake side of the rope helps engage the cam therefore, it
is important to always hold the brake side of the rope
compatible
with dynamic single ropes 8.5 to 11 mm, optimized for 8.9 to
10.5 mm
rope
installation diagram engraved on both the interior and exterior of
the device
exceptional
convenience when lowering
the
ergonomic handle allows you to easily unblock the rope and lower
someone
easily
controlled, progressive rope feed provides a smooth and
comfortable descent
Intended
for all users
simple
to use for belaying both lead or top-rope climbers
optimally
balanced design, compact and durable
aluminum
side plates, stainless steel cam and friction plate,
reinforced nylon handle
available
in gray, blue, orange
175
g
CE
EN 15151-1, UIAA
109.95
Petzl
GriGri Belay With Anti-Panic Braking
belay
device with assisted braking and anti-panic handle compatible with
single ropes from 8.5 to 11 mm
wear
plate makes it suitable for intensive use, both in the gym and at the
crag
design
of the handled camming mechanism enables exceptional descent control
selector
knob allows you to choose between two belay modes: top-rope or lead
climbing - top-rope mode and the anti-panic handle make the GRIGRI +
particularly suitable for learning how to belay - if the user
pulls too hard on the handle, the anti-panic function engages and stops
the descent
compatible
with dynamic single ropes 8.5 to 11 mm, optimized for 8.9 to 10.5 mm
aluminum
side plates, stainless steel friction plate, cam and wear plate,
reinforced nylon handle
200
g
CE
EN 15151-1, UIAA
$159.95
Complete
Rappelling . Ascending Kit
manufactured
in the usa
everything
necessary for safe, efficient rappelling
and ascending in one neat and complete package
high
quality, top brand gear that will withstand the rigors of the most
challenging terrain
370
g (295 g for ASAP and 75 g for OK TRIACT-LOCK)
$239.95
Stock item
Petzl ASAP Lock
Fall Arrester
constant
fall protection - arrests falls, slides, and uncontrolled descents
works
on vertical or angled rope
locks
on the rope even if grabbed during the fall
integrated
locking function allows the user to immobilize the device in order to
reduce the length of a fall
in
case of a strong wind, this function also prevents the rope from being
blown upward
simple
to use, and effective - moves up or down the rope, without any manual
manipulation of the device
easy
to install and remove at any point on the rope
connection
arm makes the system loss-resistant when passing intermediate anchors
can
be used with an energy absorber to work at a distance from the rope
aluminum,
stainless steel, nylon
425
g
ANSI
Z359.15 when used with an ASAP’SORBER
(international version) or
ASAP'SORBER AXESS energy absorber, an OXAN TRIACT-LOCK (international
version) carabiner, CAPTIV positioning bars, and a RAY 12 mm rope with
a sewn termination
CE
EN 12841 type A when used with an ASAP'SORBER (European or
international version) or ASAP'SORBER AXESS energy absorber, and an EN
1891 type A 10 to 13 mm rope
CE
EN 353-2 when used with an
ASAP'SORBER (European or international version) energy absorber and an
AXIS 11 mm or PARALLEL 10.5 mm rope with a sewn termination
EAC
when used with an ASAP'SORBER (European version) or ASAP'SORBER AXESS
energy absorber, and an EN 1891 type A 10 to 13 mm rope
$289.95
Stock item
Rock-N-Rescue Mini Rope
Grab
easily
slides in one direction, then locks in place as tension is applied in
the opposite direction
made
of durable hard anodized aluminum
use
on 11mm to 16mm diameter ropes
to
install, remove the split key ring and unscrew the nut with a wrench
and insert your rope or flip line - replace the cam and bolt over the
rope - tighten the nut with a wrench and reinstall the split key ring
Rope
Size: 7/16”-5/8” (11mm-16mm)
Length:
2.87” (73mm)
Width:
1.26” (32mm)
6.4
oz (182g)
$35.00
Stock item
SMC
. PMI Grip Rope Grab
manufactured
in the USA
the
best rope grab on the market
designed
to work with virtually any rope you have in your gear bag
every
component of this rope grab are meticulously hand-finished contributing
to the smooth, free action that is the hallmark of all SMC gear
100%
hand-inspected for functional characteristics
3
Sigma test: 5kN (1124 lbs)
certified
by Underwriter’s Laboratories to exceed the NFPA 1983
“T” – Technical Use requirement of 5kN
certification
information stamped on the frame and the user information is enclosed
with each item as required by NFPA
3.87
in. x 2.9 in. x 1.85 in.
Max.
Rope: 1/2 in.
6.7
oz
$77.00
Stock item
CMI
Rope Jack
manufactured
in the usa
mechanical
advantage tool for pre-tensioning static lines, light lifting and
cabling
small
enough and light enough to be carried aloft by a climber for mechanical
advantage within the crown
length
of the handle on the Rope Jack limits excessive loading to avoid rope
damage
designed
to be used by only one individual using one hand only
remove
before any'shock' load is applied
not
for heavy or dynamic loads
can
be attached mid-line and can run virtually any length of rope The MA is
approximately 5:1
no
pulleys, no extra rope, minimum weight, minimum friction quick, easy
on-off
works
well 'topside'
not
for heavy loads
approved
for life support use as long as another form of progress capture device
is used in conjunction
accepts
static ropes from 3/8-5/8" diameters
a
single person can generate 300-800 lbf while using the Rope Jack -
Testing reveals device will strip the sheath of unused 1/2" rope at
roughly 1500 lbf
removing
a load - pull the handle to allow the trailing cam to loosen,
then pull handle again to allow the forward cam to loosen
should
be relieved from tension in small increments from each cam
repspectively
ROPE
JACK $262.45
Add Optional Carry Bag $290.45
non-stock
Petzl Footape Foot Loop
manufactured
in france
underfoot
strap is abrasion resistant and slightly rigid for easy access for foot
adjustable
elastic loop works with any type of shoe or boot
double
back buckle for quick length adjustment
7
oz
(198 g)
$33.95
Stock item
Rock-N-Rescue
Foot Loop
manufactured
in the usa
can
be attached to any ascender
metal
foot loop adjuster from 36" (91 cm) to 54" (137 cm)
loop
is held open with double webbing and
uses a different color on the
inside for ease of finding
4.2
oz (118 g)
$18.25
Stock item
CMI
Foot
Ascender
manufactured
in
the usa
boot-mounted
device maintains tension on the rope
allows easier
advancement of the main ascender
promotes
better
use of body mechanics by keeping your body in an
upright position
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)