GEAR
Acrobatic Shock
Cords 8 mm
- manufactured in the usa
- state-of-the-art, professional grade available exclusively from Adrenalin Dreams
- patented Nylon end loops provide greater live-load security over standard hog ring fasteners
- ideal for aerial acrobatics & choreography, light workout and trampolines
- optional
removable,
reusable multi cord pack covers available in 26
colors - priced
by length - Contact
AD
for Pack Cover pricing
- Specs...
- Working load 15 lbs (6,8kg
- Use one cord for each 15 lbs (6,8 kg) of weight for 100% elongation
- Fail length @ 200% elongation
- No warranty
Single Anchor Rigging
Sample Diagram
- This type of rigging is suited for a single house anchor point connected to one harness pick point such as the front belt, rear belt or dorsal pick.
Double Anchor Rigging
Sample Diagram
- This type of rigging is suited for double side-by-side house anchor points connected to two harness pick points such as the hips or shoulders.
Spreader Bar Rigging
Sample Diagram
- This type of rigging is suited for a single house anchor point, separated with a spreader bar connected to two harness pick points such as the hips or shoulders.
- The use of a Spreader Bar is not recommended for house anchor height less than 12 ft (3,6 m).
- 3 ft $28.88
- 4 ft $32.63
- 5 ft $36.43
- 6 ft $40.22
- 8 ft $47.81
- 10 ft $55.40
- 12 ft $62.99
Take A Video Tour
Fabricated to order, non refundable.
Allow 2-4 weeks.
GEAR
Acrobatic Shock
Cords 9 mm
- manufactured in the usa
- state-of-the-art, professional grade available exclusively from Adrenalin Dreams
- patented Nylon end loops provide greater live-load security over standard hog ring fasteners
- ideal for aerial acrobatics & choreography, light workout and trampolines
- optional
removable,
reusable multi cord pack covers available in 26
colors
- priced
by length - Contact
AD
for Pack Cover pricing
- Specs...
- Working load 18 lbs (8 kg)
- Use one cord for each 18 lbs (8 kg) of weight for 100% elongation
- Fail length @ 200% elongation
- No warranty
Single Anchor Rigging
Sample Diagram
- This type of rigging is suited for a single house anchor point connected to one harness pick point such as the front belt, rear belt or dorsal pick.
Double Anchor Rigging
Sample Diagram
- This type of rigging is suited for double side-by-side house anchor points connected to two harness pick points such as the hips or shoulders.
Spreader Bar Rigging
Sample Diagram
- This type of rigging is suited for a single house anchor point, separated with a spreader bar connected to two harness pick points such as the hips or shoulders.
- The use of a Spreader Bar is not recommended for house anchor height less than 12 ft (3,6 m).
- 3 ft $29.50
- 4 ft $33.52
- 5 ft $37.54
- 6 ft $41.56
- 8 ft $49.60
- 10 ft $57.64
- 12 ft $65.68
Take A Video Tour
Fabricated to order, non refundable.
Allow 2-4 weeks.
GEAR
Acrobatic Shock
Cords 10 mm
- manufactured in the usa
- state-of-the-art, professional grade available exclusively from Adrenalin Dreams
- patented Nylon end loops provide greater live-load security over standard hog ring fasteners
- ideal for aerial acrobatics & choreography, light workout and trampolines
- optional
removable,
reusable multi cord pack covers available in 26
colors
- priced
by length - Contact
AD for Pack Cover Pricing
- Specs...
- Working load 20 lbs (9,5 kg)
- Use one cord for each 20 lbs (9,5 kg) of weight for 100% elongation
- Fail length @ 200% elongation
- No warranty
Single Anchor Rigging
Sample Diagram
- This type of rigging is suited for a single house anchor point connected to one harness pick point such as the front belt, rear belt or dorsal pick.
Double Anchor Rigging
Sample Diagram
- This type of rigging is suited for double side-by-side house anchor points connected to two harness pick points such as the hips or shoulders.
Spreader Bar Rigging
Sample Diagram
- This type of rigging is suited for a single house anchor point, separated with a spreader bar connected to two harness pick points such as the hips or shoulders.
- The use of a Spreader Bar is not recommended for house anchor height less than 12 ft (3,6 m).
- 3 ft $30.13
- 4 ft $34.37
- 5 ft $38.62
- 6 ft $42.86
- 8 ft $51.35
- 10 ft $60.90
- 12 ft $68.33
Take A Video Tour
Fabricated to order, non refundable.
Allow 2-4 weeks.
GEAR
Acrobatic Shock
Cords 12 mm
- manufactured in the usa
- state-of-the-art, professional grade available exclusively from Adrenalin Dreams
- patented Nylon end loops provide greater live-load security over standard hog ring fasteners
- ideal for aerial acrobatics & choreography, light workout and trampolines
- optional
removable,
reusable multi cord pack covers available in 26
colors
- priced
by length - Contact
AD
for Pack Cover pricing
- Specs...
- Working load 25 lbs (12 kg)
- Use one cord for each 25 lbs (12 kg) of weight for 100% elongation
- Fail length @ 200% elongation
- No warranty
Single Anchor Rigging
Sample Diagram
- This type of rigging is suited for a single house anchor point connected to one harness pick point such as the front belt, rear belt or dorsal pick.
Double Anchor Rigging
Sample Diagram
- This type of rigging is suited for double side-by-side house anchor points connected to two harness pick points such as the hips or shoulders.
Spreader Bar Rigging
Sample Diagram
- This type of rigging is suited for a single house anchor point, separated with a spreader bar connected to two harness pick points such as the hips or shoulders.
- The use of a Spreader Bar is not recommended for house anchor height less than 12 ft (3,6 m).
- 3 ft $31.69
- 4 ft $36.34
- 5 ft $41.09
- 6 ft $45.88
- 8 ft $56.50
- 10 ft $66.04
- 12 ft $75.49
Take A Video Tour
Fabricated to order, non refundable.
Allow 2-4 weeks.
GEAR
Cirque Aerial
Perfomance Bungees
- manufactured in the usa
- ideal for high impact advanced aerial acrobatics and SpecFx
- state-of-the-art professional grade
- available exclusively from Adrenalin Dreams - don't be mislead by cheaply made, unsafe knock-offs
- live load safety rated
- Limited Lifetime Warranty
- patented color coded built-in static safety line and end loops available in 11 Colors
- Optional Pack Cover available in 26 Colors
- Read More Details...
- the optional reusable pack cover protects against abrasion and UVL damage, adds an attractive aesthetic appeal to display organization colors or to complement costuming and scenery
- custom fabricated to a performer's weight with a specified static length and maximum elongation up to 150%
- our patented built-in static safety line halts the bungee elongation at a precise point regardless of overloading, preventing injury from over-stretching or bungee failure
- silky smooth operation, high quality materials and craftsmanship make GEAR Cirque Aerial Perfomance Bungees the preferred bungee of high-end circuses and professional aerial performers worldwide
Single Anchor Rigging
Sample Diagram
- This type of rigging is suited for a single house anchor point connected to one harness pick point such as the front belt, rear belt or dorsal pick.
Double Anchor Rigging
Sample Diagram
- This type of rigging is suited for double side-by-side house anchor points connected to two harness pick points such as the hips or shoulders.
Spreader Bar Rigging
Sample Diagram
- This type of rigging is suited for a single house anchor point, separated with a spreader bar connected to two harness pick points such as the hips or shoulders.
- The use of a Spreader Bar is not recommended for house anchor height less than 12 ft (3,6 m).
- Priced according to length beginning at $150.00 each
- Optional Pack Covers are priced according to length beginning at $45.00 each
Take A Video Tour
Fabricated to order, non refundable.
Allow 2-4 weeks.
Contact
AD for a quote.
GEAR
Hip Pick Stage
Harness
- manufactured in the usa
- french cut leg loops
- low profile webbing pick points at the hips
- concealable under costuming
- available with optional Shoulder Straps
- Read More Details...
- available in super soft fleece covered neoprene padding for wear over thin undergarments or bare skin or Polyester covered padding for lower profile
- reversible to position adjusters in front or back
- adult size fits 24" - 40" (61 cm - 104 cm) waist
- child's size fits 16"-34" (40 cm-86 cm) waist
- available in black, white, tan
- exceeds all OSHA, ANSI specifications for live load support
$298.00
Fabricated to order . Allow 2-4 weeks
GEAR
Three Pick Stage
Harness
- manufactured in the usa
- french cut leg straps
- low profile webbing pick points at the hips and rear belt
- concealable under costuming
- available with optional Shoulder Straps
- Read More Details...
- reversible to position rear pick in front
- available in super soft fleece covered neoprene padding for wear over thin undergarments or bare skin or Polyester covered padding for lower profile
- available in black, white, tan
- exceeds all OSHA, ANSI specifications for live load support
$298.00
Fabricated to order. Allow 2-4 weeks
GEAR
Four Pick Stage
Harness
- manufactured in the usa
- french cut leg straps
- low profile webbing pick points on the front belt, rear belt and hips
- concealable under costuming
- available with optional Shoulder Straps
- Read More Details...
- available in super soft fleece covered neoprene padding for wear over thin undergarments or bare skin or Polyester covered padding for lower profile
- available in white, black, tan
- exceeds all OSHA, ANSI specifications for live load support
$298.00
Fabricated to order. Allow 2-4 weeks
GEAR
Four Ring Circus Harness
- designed for aerial and circus performance
- four 1-3/4" (44 mm) ID ring picks, one front, one rear, one right side and two left side for positioning
- Read More Details...
- super soft, cushioned waist padding for long-wear comfort
- hybrid circular / French cut leg loops comfortably padded
- sliding bar adjusters on the belt and leg straps
- exceeds OSHA, API, ANSI specifications for live load support
$310.00
Contact AD To add optional Cobra Quick Release Buckles to harness belt or leg loops $50.00 each.
Fabricated to order . Allow 2-4 weeks
GEAR
Flying Ninja
Seat Harness
- manufactured in the usa
- ideal for fly wire fighting
- concealable under costuming
- available with optional Shoulder Straps
- Read More Details...
- eight soft picks on the belt and six soft picks on each leg strap to finely tune a performer's aerial position with cables or tag lines
- low profile
- neoprene padding on belt and leg loops
- reversible front to back
- available in black, white, tan
- exceeds all OSHA, ANSI specifications for live load support
$410.00
Contact AD To add optional Cobra Quick Release Buckles to harness belt or leg loops $50.00 each.
Fabricated to order . Allow 2-4 weeks
GEAR
Full Body Fly
Harness
- manufactured in the usa
- designed for hoisting and wire flying
- lightweight
- low profile, concealable under costuming
- Read More Details...
- 1 upper-dorsal pick
- 1 lower dorsal pick
- 2 hip picks
- 6 mid and lower torso picks
- 12 low profile shoulder picks (6 on each side)
- adjustable to fit adult small to large
- available in black, white, tan
- meets or exceeds all Mil Spec, API, ANSI specifications for live load support
- child sizes available
$315.00
Contact AD to add optional Cobra Quick Release Buckles to shoulder straps or leg loops $50.00 each.
Fabricated to order, allow 2-4 weeks
GEAR
Super Hero
Flying Rig
- manufactured in the usa
- multiple pick points to adjust body position and center of gravity
- adjustable uper body vest
- detachable adjustable thigh wraps
- detachable
ankle
wraps
- Read More Details...
- Each piece sold separately or as a complete rig
- Available in black, white or tan
Complete Rig $985.00
Vest only $535.00
Vest With Thigh Wraps $840.00
Vest With Ankle Wraps $745.00
Contact AD to add optional Cobra Quick Release Buckles to vest adjuster straps, leg loops or thigh wraps $50.00 each.
Fabricated to order . Non-refundable . Allow 2-4 weeks
GEAR
Flying Harness
- manufactured in the usa
- low profile, concealable under costuming
- adjustable waist from 23"- 40" (58 cm-101 cm)
- custom sizing available
- includes webbing pick loops to add optional shoulder straps
- available with fixed bearing swivels, three hole shackle swivels, fixed quick releases or swivel quick releases
- Read More Details...
- exceed Mil Spec, API, ANSI specifications for live load support
- available in black, white, beige
- Bearing Swivel $845.00
- Bearing Swivel with Shoulder Straps & Shackles $1,120.00
- Three Hole Shackle Swivel$1050.00
- Three Hole Shackle Swivel with Shoulder Straps & Shackles $1,325.00
- Quick Release Swivel $1,350.00
- Quick Release Swivel with Shoulder Straps & Shackles $1,625.00
- Fixed Quick Release $955.00
- Fixed Quick Release with Shoulder Straps & Shackles $1,230.00
Add stirrups With Shackles $275.00
Fabricated to order . Non-refundable . Allow 2-4 weeks
GEAR
Flying Shorts
- manufactured in the usa
- available with bearing swivels, adjustable 3-hole shackle swivels, quick release swivels or fixed quick releases
- connection loops to attach optional shoulder straps snd stirrups
- Read More Details...
- exceed Mil Spec, API, ANSI specifications for live load support
- available in black, white, beige
- Bearing Swivel $845.00
- Bearing Swivel with Shoulder Straps & Shackles $1,120.00
- Three Hole Shackle Swivel$1050.00
- Three Hole Shackle Swivel with Shoulder Straps & Shackles $1,325.00
- Quick Release Swivel $1,350.00
- Quick Release Swivel with Shoulder Straps & Shackles $1,625.00
- Fixed Quick Release $955.00
- Fixed Quick Release with Shoulder Straps & Shackles $1,230.00
Fabricated to order . Non-refundable . Allow 2-4 weeks
Gyroscopic
Flying
Harness
- for use with aerial bungee rig or fly wires
- easy to put on and remove
- comfortable fit during aerial acrobatics
- automatically centers the user in the belt
- air pressure secures harness firmly to the body making it easy to perform 360º aerial summersaults and twists
- quick inflation with battery powered air pump allows variable size adjustment
- Video
- exceed Mil Spec, API, ANSI specifications for live load support
- available in black, white, beige
Small
20" - 26" (51-66 cm) waist
Large
27" - 38" (68-96 cm) waist
$2,400.00
Includes Foot Pump
Special order . Non-refundable . Allow 3-4 weeks
GEAR
Hanging
Harness
- manufactured in the usa
- comfortable, lightweight
- holds body in natural hanged position
- low profile, concealable under costuming
- Read More Details...
- stirrups relieve the pressure away from the crotch and back
- exceeds all Mil Spec, API, ANSI specifications for live load support
$585.00
Fabricated to order. Allow 2-4 weeks
GEAR
Shoulder
Straps
- fits any GEAR seat or flying harness equipped with attachment points
- includes four attachment shackles
- exceeds all OSHA, ANSI specifications for live load support
- black, white or tan
Fabricated to order, allow 2-4 weeks
GEAR
Stirrups
- fits any GEAR seat or flying harness
- includes four attachment shackles
- one size fits all
- 1 upper-dorsal pick
- 1 lower dorsal pick
- 2 hip picks
- 6 mid and lower torso picks
- 12 low profile shoulder picks (6 on each side)
- adjustable to fit adult small to large
- available in black, white, tan
- meets or exceeds all Mil Spec, API, ANSI specifications for live load support
- child sizes available
Fabricated to order, allow 2-4 weeks
GEAR
Wrist Loops
- manufactured in the usa
- comfortably padded
- sliding keeper to adjust loop size
- Read More Details...
- three sizes for small, medium or large wrists
- optional sewn-in swivel carabiner
- sold separately
10" (25,4 cm)$47.00
10" (25,4 cm) with SwivaEye$172.00
12" (30,4 cm)$52.00
12" (30,4 cm) with SwivaEye $177.00
14" (35,5 cm)$56.00
14" (35,5 cm) with SwivaEye $180.00
Fabricated to order, allow 2-4 weeks
GEAR
Aerial Training
Straps
- manufactured in the usa
- comfortable super soft Nylon
- 18" (45,7 cm) total length
- straight anchor loop
- twisted hand loop provides a tight, secure grip
- MBS 7,000 lbs (3,175 kg)
- sold in pairs
$42.00
Fabricated to order, allow 3-4 weeks
GEAR
Aerial Pro
Straps
- manufactured in the usa
- comfortable super soft Nylon
- 9 ft (2,75 m) total length
- straight anchor loop
- twisted hand loop provides a tight, secure grip
- MBS 7,000 lbs (3,175 kg)
- sold in pairs
$134.00
Fabricated to order, allow 2-4 weeks
GEAR
Aerial
Contortion
Straps
- manufactured in the usa
- comfortable super soft Nylon
- 9 ft (2,75 m) loop
- twisted hand loop provides a tight, secure grip
- MBS 7,000 lbs (3,175 kg)
- sold in pairs
$145.00
Fabricated to order, allow 2-4 weeks
GEAR
Aerial Strap
Keeper
- manufactured in the usa
- sturdy, heavy duty double webbing loop
- 1.5" (3,8 cm) wide
- slides along the length of aerial Contortion straps to adjust strap loop length
- sold in set of four
Rigging
Shackles
- manufactured in france
- compact pick connections for harnesses or fly rigging
- live load safety rated
- stainless steel
- self locking with 'click' indicator
- available in D or bow style, brite or black
- various models available with captive pin
- Read More Details...
- 3/16" (5 mm) minimum breaking strength 2,204 lbs (1,000 kg)
- 1/4" (6 mm) minimum breaking strength 3,527 lbs (1,600 kg)
- 5/16" (8 mm) minimum breaking strength 7,920 lbs (3,592 kg)
- size denotes diameter of capture bar
- captive pin model features non-removable locking pin
- sold in sets of two
- 3/16" (5 mm) D Brite set of two $33.00 . 13 Sets In Stock
- 3/16" (5 mm) Bow Brite set of two $37.50 . 3 Sets In Stock
- 3/16" (5 mm) D Black Captive Pin set of two $51.50 . Out Of Stock 3-6 Weeks
- 3/16" (5 mm) Bow Black Captive Pin set of two $56.25 . 4 Sets In Stock
- 1/4" (6 mm) D Brite set of two $42.50 . 4 Sets In Stock
- 1/4" (6 mm) D Black set of two $53.00 . 7 Sets In Stock
- 1/4" (6 mm) Bow Brite set of two $47.75 . 3 Sets In Stock
- 1/4" (6 mm) Bow Black set of two $47.50 . 8 Sets In Stock
- 1/4" (6 mm) Bow Black Captive Pin set of two $73.00 . Out Of Stock 3-6 Weeks
- 5/16" (8 mm) D Brite set of two $67.00 . 14 Sets In Stock
- 5/16" (8 mm) D Black set of two $64.50 . 2 Sets In Stock
- 5/16" (8 mm) Bow Brite set of two $75.00 . 3 Sets In Stock
- 5/16" (8 mm) Bow Black set of two $74.50 . Out Of Stock 3-6 Weeks
Omega
Pacific Raider
Carabiner
- the strongest and most durable design in life safety equipment
- lightest aluminum alloy available to rival the strength of steel
- Read More Details...
- dimensions 4.3 in x 2.5 in (10,9cm x 6,35 cm)
- gate opening 0.83 in (2,1 cm)
- major axis 24kN (5,395 lbf)
- minor axis 8kN (1,798 lbf)
- gate open 7kN (1,574 lbf)
- weight 2.89 oz (82g)
Gray Or Black $18.75
Petzl
William M33A OK Carabiners
- manufactured in france
- aluminum
- versatile oval symmetrical shape for optimal positioning of devices
- keylock system helps prevent the carabiner from snagging during maneuvers
- Read More Details...
- SCREW-LOCK: The manual screw-lock with red band provides a visual warning when the carabiner is unlocked
- BALL-LOCK: Automatic locking with triple-action gate opening, with lock indicator, gray
- TRIACT-LOCK: Automatic locking with triple-action gate opening
- gate opening .74" (19 mm)
- breaking strength 24 kN
- 2.6 oz (75 g)
M33ASL Screw Lock $17.95
M33A SLN Screw Lock Black $20.00
M33A BL Ball Lock $23.25
M33A TL Triact $23.25
M33A TLN Triact Black $24.25
Petzl
Oxan M72A Steel
Carabiners
- manufactured in france
- steel suitable for harsh conditions
- keylock system helps prevent the carabiner from snagging during maneuvers
- Read More Details...
- SCREW-LOCK: The manual screw-lock with red band provides a visual warning when the carabiner is unlocked
- TRIACT-LOCK: automatic locking with triple-action gate opening
Triact Specs
M72ASL Screw Loc $15.75
M72ASLN Screw Loc Black $18.00
M72ATLA Triact Gold $26.50
M72ATLN Triact Black $28.50
Petzl
M36A William
Aluminum
Carabiner
- manufactured in france
- lightweight, large-capacity asymmetrical carabiner is made of aluminum
- pear shape that is practical for easily connecting multiple items
- fluid interior design and keylock system facilitate handling
- Read More Details...
- SCREW-LOCK: The manual screw-lock with red band provides a visual warning when the carabiner is unlocked
- BALL-LOCK: Automatic locking with triple-action gate opening, with lock indicator
- TRIACT-LOCK: Automatic locking with triple-action gate opening
- Certification: CE EN 362, EAC, NFPA 1983 Technical Use
Ball Lock Specs
Triact Specs
M36ASL Screw Lock Gray$20.00
M36A SLN Screw Lock Black $22.00
M36A BL Ball Lock Gray $25.00
M36A BLY Ball Lock Gold$25.25
M36A TL Triact Gray$25.25
M36A TLY Triact Gold $25.25
M36A TLN Triact Black $27.50
GEAR
Quick Release
- manufactured in the usa
- ideal for quick release of harness from rigging or to quickly separate rigging components
- Read More Details...
- Cobra quick release buckle disengages by depressing ears
- snaps closed and locks automatically
- does not release under load
- 1 in (25 mm) sewn webbing loops on each end to accept carabiner, quick link or shackle
- MBS 2,000 lbf (9 kN)
$90.00
Three
Ring Circus
Quick Release
- manufactured in the usa
- manual pull cord release for harness, aerial escape, rigging release
- small size for easy concealment carries 750 lbs (340 kg) or larger size for heavier rigging carries 1200 lbs (544 kg)
Small $105.00
Large $110.00
Petzl
P58 Swivels
- manufactured in france
- sealed ball bearing
- smooth operating after years of use
- Read More Details...
- compact version designed for one person loads . MBS 5,000 lbs (23 kN) . 3.4 oz (95 g)
- large model designed for heavier loads . allows 3 carabiners to be used in either end . MBS 8,093 lbf (36 kN) . 5.2 oz (150 g)
- UL labeled to meet NFPA 1983-06 class "G"
P58S Small $69.95
P58L
Large $74.95
Petzl
P58SO Open
And Micro Swivels
- manufactured in france
- allen key locking gate
- large 14 mm openings
- Read More Details...
- reduces the bulk and weight of component systems and solves twisting and tangling problems with ropes and lanyards
- sealed ball bearings offer excellent performance and reliability
P58SO Open Specs
P58XO Micro Specs
P58 SO Open $94.95
P58XO Micro $64.95
Rock
Exotica Swivels
- manufactured in the usa
- all models incorprate stainless steel axle and ball bearings
- Working load 25 lbs (12 kg)
- Use one cord for each 25 lbs (12 kg) of weight for 100% elongation
- Fail length @ 200% elongation
- two large 1.2" (30mm) eyes are ideal for use with webbing, and allows for connection of multiple carabiners while still aligning perfectly with only one connector
- MBS 36 kN
- 4.48 oz (127 g)
- CE 0120 EN354
SS1 Large Rotator Shackle Specs
- saves valuable headspace by allowing you to connect webbing, eyes or thimbles directly to the swivel without a carabiner
- steel shackle bolt will also increase the longevity of the swivel when connected to steel carabiners or other steel components
- MBS 36 kN
- 5.76 oz (163 g)
S2SB Stainless Steel Specs
- heavy duty stainless steel swivel will outlast aluminum when connected to steel components
- offers additional corrosion resistance when working in marine environments
- MBS 36 kN
- 8 oz (227 g)
- CE 0120 EN354
- compact, low profile swivel ideal for special uses where a smooth form, minimum size and minimum weight are required
- MBS 36 kN
- 3.5 oz (99 g)
- CE 0120 EN 354
- uses a miniature high capacity thrust bearing rubber O-ring in the small ring, keeping a 12mm carabiner positioned
- MBS 23 kN
- 2 oz (57 g)
- CE 0120 EN354
S2L Large Round $72.00
SS1 Large Rotator Shackle $90.00
S2SB Stainless Steel $190.00
S3 Orbitor $72.00
S11 Nano $74.00
Rock Excotica products may have a lead time of 2-6 weeks
Rock
Exotica SwivaEye
- manufactured in the usa
- integration of a technically advanced carabiners with a high-efficiency swivel
- utilizes high quality ball-bearings
- designed for high-speed rotations with the lowest possible friction
- available with single carabiner and eye or double carabiner
- Read More Details...
- weight: 5.5 oz (153 gm)
- major axis: 30 kN
- minor axis: 7 kN
- open gate: 12 kN
- gate opening: .84” (21 mm)
- certification: CE
Single $99.00
Double $109.00
CMI
Swivel Pulley
- manufactured in the usa
- combines a pulley with a swivel to offer superb advantages
- lighter, stronger than comparable products and save valuable vertical space
- Read More Details...
- available with or witout a stainless steel slic pin that allows you to remove the sheave
- capacity: ½” rope
- sheave: 1 ¼” aluminum
- bushing
- 4 ½”x 2”
RP161 without slic pin $82.00
RP161
with slic pin $98.95
Petzl
Spin L1 Swivel
Pulleys
- designed for maximum simplicity in setting up hauling or load deviation systems
- triple-action opening of the moving side plate is quick and easy, even with gloves
- the rope can be installed with the device connected to the anchor
- Read More Details...
- red mark provides a visual warning when the moving side plate is unlocked
- special side plate design protects the rope path
- large diameter sheave mounted on sealed ball bearings
- accepts up to three carabiners
- accepts 7-13 mm rope
- material(s): aluminum, stainless steel, nylon
- sheave type: sealed ball bearings
- sheave diameter: 38mm
- maximum working load: 4 x 2 = 8kN
- breaking strength: 36kN
- efficiency: 95%
- 290g
- certification(s): CE EN 12278, NFPA 1983 pulley general Use, UIAA
$82.00
Petzl
Spin L2 Swivel
Double Pulley
- designed for maximum simplicity in setting up hauling or load deviation systems
- triple-action opening of the moving side plate is quick and easy, even with gloves
- the rope can be installed with the device connected to the anchor
- Read More Details...
- red mark provides a visual warning when the moving side plate is unlocked
- special side plate design protects the rope path
- large diameter sheave mounted on sealed ball bearings
- parallel-mounted sheaves and auxiliary attachment point for setting up various types of complex haul systems
- accepts up to three carabiners
- accepts 7-13 mm rope
- material(s): aluminum, stainless steel, nylon
- sheave type: sealed ball bearings
- sheave diameter: 38mm
- maximum working load: 4 x 2 = 8kN
- breaking strength: 36kN
- efficiency: 95%
- 290g
- certification(s): CE EN 12278, NFPA 1983 pulley general Use, UIAA
Gold $139.95
Gold
$144.95
CAMP
Gyro 4 Swivel
Plate
- 3D swiveling rigging plate equipped with 4 connection points that rotate independently to allow them to be self-orienting even in the most complex rigging scenarios
- GYRO system allows for countless possibilities of connection between different elements that need freedom of movement
- innovative design prevents the accumulation of dirt and makes inspection easy
- Read More Details...
- main structural flanges are carbon steel with a double corrosion preventive coating
- swivel balls and attachment points are stainless steel
- includes four removeable silicon anti-rotation inserts
- working load limit 3 kN
- minimum breaking strength 26 kN
- working load limit and minimum breaking strength are doubled when the two main bodies are oriented horizontally
- 3" x 3" (77 mm x 77 mm)
- 14 oz (397 gm)
$159.95
Omega
Pacific Rigging Rings
- manufactured in the usa
- light weight
- used for establishing anchors
- solid, seamless design yields an incredible breaking strength of 25kN
- compatible with a wide range of hardware and textile connecting components
- smooth bend radius is both rope and textile friendly
- helps organize single or multiple attachments
- color coded anodize for easy size identification
- anodizing aids in corrosion resistance
- Model 1 fits 4"-5.5" (10-14 cm) beam flange
- Model 2 fits 5.75"-7.25" (14,5-18,5 cm) beam flange
- Model 3 fits 7.5"-9" (19-22,5 cm) beam flange
- Model 4 fits 9.5"-12' (24 cm-30,5 cm) beam flange
- powder coated steel finish
- MBS 5,000 lbs (2,268 kg)
- includes screw link
Large Black $8.99
Rock
Exotica Rockstar
Rigging Plate
- manufactured in the usa
- provides rigging professionals with a variety of advantages over flat rigplates
- professionals now have the ability to connect multiple lines from several dimensions to create a floating anchor that beforenow, was cumbersome and complex
- 7.4
oz
-
$140.00
Petzl
Paw Rigging
Plate
- manufactured in france
- designed to make multiple attachment points from a single anchor
- allows easy organization of the work area
- Read More Details...
- high strength aluminum for an excellent strength to weight ratio
- 3/4" (19 mm) holes in all models allow the locking sleeves of most carabiners to pass through
- large rigplate has 14 anchor points 12.3 oz. (350 g)
- medium rigplate has 7 anchor points 7.4 oz. (210 g)
- small plate has 3 anchor points 1.9 oz. (55 g)
- MBS 8,093 lbf (36 kN)
- CE and NFPA "G" certified
Large Gold $79.95
Large Black $81.95
Medium Blue $54.95
Medium Black $60.95
Small red $29.95
Small Black $31.95
Beam
Clamps
- manufactured in the usa
- ideal for hanging bungee rigging, climbing rope, athletic bags, hoops, silks, any aerial choreographic or athletic equipment
- fits 3" (7.6 cm) to 12" (30.5 cm) beam flange
- Read More Details...
- powder coated steel finish
- MBS 5,000 lbs (2,268 kg)
- includes screw link
3" (7,6 cm) to 9" (22.9 cm) $120.00
9.25" (23.5 cm) to 12" (30.5 cm) $175.00
Adjustable
Beam Clamp
- manufactured in the usa
- steel construction with a welded steel ring for easy connection
- fits I beam or bar joist flanges 3.5"- 12" (89-30,5 cm) wide
- 1/2" (12,5 mm) All-Thread
- 2,000 lb (907 kg) weight capacity
$189.00
Wood
Joist Anchor
Clamp
- permanent anchor stays for the life of the structure
- fits the most common size I-Joists from 1-3/4" to 2-3/4"
- Read More Details...
- installs using a drill through method and can have backer boards installed for a secure fit
- maximum working load 340 lbs (154 kg)
- meets all applicable OSHA Standards 1910.66 & 1926.502 for fall protection anchors
$49.00
Beam
Trolley
- welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
- hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
- accommodates beam flanges 2-1/2 - 8" (6,3-20 cm)
- Read More Details...
- load capacity 1/2 ton (454 kg)
- built-in bumper guards on the side plates increase safety and extend trolley life
- easily adjustable to wide-flange H-beams, standard I-beams or curved track with the included spacer washers
- load tested to 125% of capacity with certificate
- complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
$215.00
GEAR
Spreader Bar
- manufactured in the usa
- splits single anchor pont into two pick points
- Read More Details...
- 1.25" (28 mm) Delrin spreader bar
- 1" (25 mm) Nylon webbing strapping with sewn pick loops MBS 2,000 lbs - webbing is replaceable
- aluminum anchor ring 2.2” (54 mm) OD x 1.18” (30 mm) ID MBS 5,620 lbs (2,549 kg)
- overall height 18" (45.7 cm)
- available in 24", 36", 48" (61 cm, 91 cm, 122 cm) lengths
24" (61 cm) bar $105.00
36" (91,4 cm) bar $115.00
48" (122 cm) bar $125.00
GEAR
Twin Loop Runner
. Standard
- manufactured in the usa
- super duty multi-purpose twin loop sling is a valuable tool which can be used as an anchor sling, as a tether between equipment, clip-in holding strap or many other uses
- standard style made from 1" (2,5 cm) tubular Nylon webbing with a 2" (5 cm) grab loop on each end
- breaking strength 4,000 lbs (1,814 kg)
- available in 11 Colors
- Prices...
- 12" (30 cm) $13.00
- 18" (46 cm) $13.50
- 24" (61 cm) $13.75
- 36" (91 cm) $14.25
- 48" (122 cm) $14.75
- 60" (152 cm) $15.25
- 72" (182 cm) $16.00
- 96" (244 cm) $17.00
- 120" (305 cm) $18.00
GEAR
Twin Loop Runner
. Heavy Duty
- manufactured in the usa
- multi-purpose twin loop sling is a valuable tool which can be used as an anchor sling, as a tether between equipment, clip-in holding strap or many other uses
- heavy duty style made from 1" (2,5 cm) flat Nylon webbing with a 2" (5 cm) grab loop on each end
- breaking strength 8,000 lbs (3,628 kg)
- available in 3 Colors
- Prices...
- 24" (61 cm) $19.75
- 36" (91 cm) $21.00
- 48" (122 cm) $22.00
- 60" (152 cm) $23.25
- 72" (182 cm) $24.25
- 96" (244 cm) $26.75
- 120" (305 cm) $29.00
GEAR
Loop Sling .
Standard
- manufactured in the usa
- super duty multi-purpose twin loop sling is a valuable tool which can be used as an anchor sling, as a tether between equipment, clip-in holding strap or many other uses
- standard style made from 1" (2,5 cm) tubular Nylon webbing
- breaking strength 4,000 lbs (1,814 kg)
- available in 11 Colors
- Prices...
- 12" (30 cm) $8.25
- 18" (46 cm) $8.75
- 24" (61 cm) $9.50
- 36" (91 cm) $10.50
- 48" (122 cm) $11.75
- 60" (152 cm) $12.75
- 72" (182 cm) $15.00
- 96" (244 cm) $17.00
- 120" (305 cm) $19.25
GEAR
Loop Sling .
Heavy Duty
- manufactured in the usa
- multi-purpose twin loop sling is a valuable tool which can be used as an anchor sling, as a tether between equipment, clip-in holding strap or many other uses
- heavy duty style made from 1" (2,5 cm) flat Nylon webbing
- breaking strength 8,000 lbs (3,628 kg)
- available in 3 Colors
- Prices...
- 12" (30 cm) $13.25
- 18" (46 cm) $14.00
- 24" (61 cm) $15.00
- 36" (91 cm) $17.50
- 48" (122 cm) $19.75
- 60" (152 cm) $22.00
- 72" (182 cm) $24.75
- 96" (244 cm) $28.75
- 120" (305 cm) $33.25
GEAR
Daisy Chain
- manufactured in the usa
- use as an adjustable anchor extension for aerial equipment
- pockets stay open under load for easy clip in and out
- 1" (25mm) tubular webbing
- end-to-end strength 3500 lbf (15.57 kN)
- loop strength 1200 lbf (5.33 kN)
60" (162 cm) 15 Loops $32.00
74" (188 cm) 19 Loops $38.00
GEAR
Anchor Straps
- manufactured in the usa
- made from 1.75" (44 mm) heavy duty Nylon webbing
- Read More Details...
- minimum breaking strength end to end 6,000 lbf (2,721 kgf) and basket 11,000 lbf (4,990 kgf)
- available with sewn end loops to accommodate one connection link or steel D rings to accommodate several connection links
Sewn Loop Prices
D Ring Prices
Aircraft
Cable
- manufactured in the usa
- very flexible
- ideal for harness flying, sound and scenery flying
- Read More Details...
- galvanized
- non-reflective black powder coating helps conceal cable for filming and live performances
- available in 250 ft or 500 ft (76,2 m or 152 m) spool
- 1/16" (1,5 mm) MBS 480 lbf (217 kg)
- 1/8" (3 mm) MBS 1,700 lbf (771 kg)
- 3/16" (5 mm) MBS 3,700 lbf (1,678 kg)
- 1/4" (6 mm) MBS 7,000 lbf (3,175 kg)
1/16"
x 500 ft (1,5 mm x 152 m) $165.00
1/8" x 250 ft (3 mm x 76,2 m) $165.00
1/8" x 500 ft (3 mm x 152 m) $230.00
3/16" x 250 ft (5 mm x 76,2 m) $185.00
3/16" x 500 ft (5 mm x 152 m) $350.00
1/4" x 250 ft (6 mm x 76,2 m) $275.00
1/4" x 500 ft (6 mm x 152 m) $450.00
1/8" x 250 ft (3 mm x 76,2 m) $165.00
1/8" x 500 ft (3 mm x 152 m) $230.00
3/16" x 250 ft (5 mm x 76,2 m) $185.00
3/16" x 500 ft (5 mm x 152 m) $350.00
1/4" x 250 ft (6 mm x 76,2 m) $275.00
1/4" x 500 ft (6 mm x 152 m) $450.00
Variable
Speed Cable
Trolley
- manufactured in the usa
- universal fit for all cables from 1/4" (6mm) to 1/2" (12.5mm)
- speed reducing / braking capable
- includes locking screw gate carabiner
$475.00
Crash
Mats
- manufactured in the usa
- specifically designed for shock absorbing body landings
- ideal for fight coordination, gymnasium landings, stage fall protection
- Read More Details...
- lightweight 55 ILD Polyurethane foam for soft landing
- durable 18 oz. coated vinyl sides and bottom
- available "breather mesh" or vinyl top
- sturdy nylon handles securely attached for easy positioning and transport
- optional Velcro fasteners to securely combine mats
- heavy duty zipper allows cover to be removed to replace foam
- custom sizes available
4" (10 cm) Mats
4 ft x 6 ft x 4" (122 cm x 183 cm x 10 cm) $415.00
4 ft x 6 ft x 4" (122 cm x 183 cm x 10 cm) Dual Density $565.00
4 ft x 8 ft x 4" (122 cm x 244 cm x 10 cm) $490.00
4 ft x 8 ft x 4" (122 cm x 244 cm x 10 cm) Dual Density $650.00
5 ft x 8 ft x 4" (152 cm x 244 cm x 10 cm) $575.00
5 ft x 8 ft x 4" (152 cm x 244 cm x 10 cm) Dual Density $699.00
5 ft x 10 ft x 4" (152 cm x 305 cm x 10 cm) $640.00
5 ft x 10 ft x 4" (152 cm x 305 cm x 10 cm) Dual Density $790.00
8" (20 cm) Mats
4 ft x 6 ft x 8" (122 cm x 183 cm x 20 cm) $560.00
4 ft x 8 ft x 8" (122 cm x 244 cm x 20 cm) $705.00
5 ft x 8 ft x 8" (152 cm x 245 cm x 20 cm) $890.00
5 ft x 10 ft x 8" (152 cm x 305 cm x 20 cm) $998.00
6" (15 cm) Tri-Fold Mats
4 ft x 6 ft x 6" (122 cm x 182 cm x 15 cm) $575.00
4 ft x 6 ft x 6" (122 cm x 182 cm x 15 cm) Dual Density $710.00
4 ft x 8 ft x 6" (122 cm x 244 cm x 15 cm) $665.00
4 ft x 8 ft x 6" (122 cm x 244 cm x 15 cm) Dual Density $805.00
Optional Velcro Attachments to combine mats
Loop side Velcro around top perimeter of any mat $65.00
Loop side Velcro on any two top sides of any mat $32.50
Hook side Velcro lock strips
4 ft (122 cm) $45.00
5 ft (152 cm) $55.00
10 ft (305 cm) $75.00
Due to current variables in materials availability and cost, list prices may vary. Contact AD for up-to-date pricing and shipping quote.
Allow 3-4 weeks.
Petzl
Jag Hoisting Rig
- compact, efficient hoisting rig, making a releasable anchor and tensioning system
- can be coupled with a descender to make a reversible haul kit
- 4:1 mechanical advantage allows user effort to be divided by 4
- excellent efficiency due to sheaves mounted on sealed ball bearings
- deployment possible even when the distance to the anchor is very short, thanks to the extreme compactness of the collapsed system
- Read More Details...
- 8 mm lightweight rope
- mechanical advantage guarantees a good grip
- quick and easy to deploy, kit always ready to use, thanks to the flexible cover that prevents any risk of tangling
- overall height 18" (45.7 cm)
- haul end immediately identifiable, thanks to the yellow color of the end of the cover
- the ends of the cover hold the connectors in position to facilitate clipping
- includes two Am'D TRIACT-LOCK auto-locking carabiners
- available in three lengths: 1, 2 and 5 m
- material(s): aluminum, nylon, polyurethane
- sheave type: sealed ball bearings
- working load: 6 kN
- breaking strength: 16 kN
- efficiency: 91 %
- weight 1460 g
- Certification(s): EAC
1 Meter Length $349.95
3 Meter Length $369.95
5 Meter Length $409.95
CMI
8:1 Heavy Load
Hoisting Rig
- manufactured in the usa
- utilizes 8 sheaves that turn on sealed ball bearings for upto 8:1 ratio mechanical advantage
- the lower quad sheave pulley is mated to the upper quad sheave
- remotely triggered retractable brake
- Read More Details...
- the cam can be locked in the open position to allow freedom of movement up and down or it can be closed so that the user can pull the load and simply let go of the rope, stopping the load in the current position
- includes 100 ft (30 m) NER VPC hybrid performance braid 8 mm rope with a strong, lightweight core of vectran and polyefin surrounded by a durable UV-resistant polyester cover, low elongation and excellent hand grip
- 12 ft (3.6 m) when fully extended when rigged 8:1
- upper pulley 5.50"x4.25" (14 cm x 10.8 cm) 1.20lbs (544 g)
- lower pulley 4.25" x 3.25" (10.8 cm x 8.2 cm) 1.05 lbs (476 g)
- MBS 11,000 lbf(48.8 kN)
Pulley Rig With Rope $607.80
Pulleys Only $401.85
Vertical
Flying Rig
With Seat
Harness
- designed to attach to an overhead I beam, bar joist, wood beam, batten or similar structural component
- allows hoisting a performer by the hips in a seat harness with a pre-rigged 4:1 mechanical advantage pulley system
- allows locking in place at any elevation
- allows controlled descent
- requires 2-3 operators
- ideal for green screen work or live venues
- AD recommends purchasing our Vertical Flying Rig Seat Harness Diagram to determine which items from the Equipment Package may suit your need - some items may be eliminated, some items may need to be added or some items may need to be substituted to suit your particular application and venue
- Read More Details...
- purchase price of rigging diagram is pro-rated toward equipment purchase of $1,000.00 minimum
View Equipment Package
Equipment package average price $2,500.00
Contact AD to order your customized package
Vertical Fly Rigging Seat Harness Diagram $150.00
Add to cart to receive a PDF via email
Vertical
Flying Rig
With Body Harness
- designed to attach to an overhead I beam, bar joist, wood beam, batten or similar structural component
- allows hoisting a performer by a single pick point in a body harness with a pre-rigged 4:1 mechanical advantage pulley system
- allows locking in place at any elevation
- allows controlled descent
- requires 2-3 operators
- ideal for green screen work or live venues
- AD recommends purchasing our Vertical Flying Rig Body
Harness Diagram to
determine which items from the Equipment Package may suit your need -
some items may be eliminated, some items may need to be added or some
items may need to be substituted to suit your particular application
and venue
- Read More Details...
- purchase price of rigging diagram is pro-rated toward equipment purchase of $1,000.00 minimum
View Equipment Package
Equipment package average price $2,000.00
Contact AD to order your
customized package
Vertical Fly Rigging Body Harness Diagram $150.00
Add to cart to receive a PDF via email
Vertical Fly Rigging Body Harness Diagram $150.00
Add to cart to receive a PDF via email
Horizontal
Flying Rig
With
Seat Harness
- designed to attach to an overhead I beam or similar structural component which will accept an I beam trolley to implement horizontal travel
- allows hoisting a performer by the hips in a seat harness with a pre-rigged 4:1 mechanical advantage pulley system
- allows locking in place at any elevation
- allows controlled descent
- requires 3-4 operators
- ideal for green screen work or live venues
- AD recommends purchasing our Horizontal Flying Rig Seat
Harness Diagram to
determine which items from the Equipment Package may suit your need -
some items may be eliminated, some items may need to be added or some
items may need to be substituted to suit your particular application
and venue
- Read More Details...
- purchase price of rigging diagram is pro-rated toward equipment purchase of $1,000.00 minimum
View Equipment Package
Equipment package average price $3,300.00
Contact AD to order your
customized package
RiggingDiagram $150.00
Add to cart to receive a PDF via email
RiggingDiagram $150.00
Add to cart to receive a PDF via email
Horizontal
Flying Rig
With
Super Hero Harness
- designed to attach to an overhead I beam or similar structural component which will accept an I beam trolley to implement horizontal travel
- allows hoisting a performer in a "Superman Flying" position with a pre-rigged 4:1 mechanical advantage pulley system
- allows locking in place at any elevation
- allows controlled descent
- requires 3-4 operators
- ideal for green screen work or live venues
- AD recommends purchasing our Horizontal Flying Rig Super Hero Harness Diagram to determine which items from the Equipment Package may suit your need - some items may be eliminated, some items may need to be added or some items may need to be substituted to suit your particular application and venue
- Read More Details...
- purchase price of rigging diagram is pro-rated toward equipment purchase of $1,000.00 minimum
View Equipment Package
Equipment package average price $3,000.00
Contact AD to order your
customized package
Rigging Diagram $150.00
Add to cart to receive a PDF via email
Rigging Diagram $150.00
Add to cart to receive a PDF via email
